Disassembly/Repair of the mobile device Apple iPhone 6S (iPhone 6S A1633, A1688, A1634, A1687) with each step description and the required set of tools.

Using the key tool, open the SIM card slot and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew the 2 bolts on the end of the phone.

Lift the display & Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connectors.

Disconnect the battery connector.

⚠ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts and remove the bracket holds the connectors.

Disconnect connector on the PCB and remove the display.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connectors.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts and remove the Wi Fi antenna.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the camera.

Disconnect connector on the PCB and remove the main camera.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.

Disconnect connectors on the PCB.

Remove the PCB.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the vibrator.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts.

Pry & remove the part with speaker (buzzer).

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts and remove the laying.

Remove the flaxible flat cable with a microphone, lightning\charging port and headset jack.

Parts in the back cover (housing).