Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Asus ZenFone 2 Laser ZE500KG with each step description and the required set of tools.
3936
Views
1
Likes
—
Share
8
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 15 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly.
Step 6.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 7.
Disconnect the connector
Disconnect connector on the PCB.
Step 8.
Remove the bracket
Remove the bracket.
Step 9.
Remove the motherboard
Disconnect the inter-board connector on the inside, turn over the main board and disconnect the coaxial cable connector and remove the board.
Step 10.
Remove the sub-board
Remove the lower PCB.
Step 11.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
3936
Views
1
Likes
—
Share
8
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Asus instructions most liked by readers
New instructions
Check our
New Asus brand instructions on vrm24.com
