Recommended tools
Screwdriver Torx Т2
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Asus ZenFone 3 Zoom ZE553KL with each step description and the required set of tools.
7080
Views
2
Likes
—
Share
9
Questions
Step 1.
Unscrew the screws
Using a screwdriver (hex T2), unscrew the 2 bolts on the end of the phone.
Step 2.
Remove the tray
Using the key tool, open the SIM card slot and remove it.
⚠ Warning!
Do not push too hard this may cause damage.
Step 3.
Open the back cover
Open the back cover.
Step 4.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 2 bolts.
Step 5.
Disconnect the battery connector
Disconnect the battery connector.
⚠ Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 6.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 3 bolts at the bottom of the phone.
Step 7.
Remove the loudspeaker
Remove the bottom part with a speaker and antennas.
Step 8.
Disconnect the connectors
Disconnect the connectors on the bottom of the PCB.
Step 9.
Remove the sub-board
Remove the lower PCB.
Step 10.
Disconnect the connectors
Disconnect the connectors on the PCB.
Step 11.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 6 bolts in the PCB.
Step 12.
Remove the frame
Remove the panel at the top.
Step 13.
Remove the motherboard
Remove the PCB.
Step 14.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
7080
Views
2
Likes
—
Share
9
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Asus instructions most liked by readers
New instructions
Check our
New Asus brand instructions on vrm24.com
