Recommended tools
Screwdriver Torx T5
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Asus ZenFone Go ZB452KG with each step description and the required set of tools.
4231
Views
0
Likes
—
Share
10
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (hex T5), unscrew 7 bolts in the frame of the phone.
Step 4.
Remove the battery
Lift and remove the battery.
Step 5.
Remove the loudspeaker
Pry and remove the speaker (buzzer) in the frame.
Step 6.
Disconnect the connectors
Disconnect connectors on the lower PCB.
Step 7.
Remove the sub-board
Remove the lower PCB.
Step 8.
Remove the small board
Disconnect the connector on the PCB and remove the board with volume buttons.
⚠ Warning!
The connector is located on the inside.
Step 9.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 10.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 11.
Remove the motherboard
Overturn the main board, disconnect the coaxial cable connector from the inside and remove the PCB.
Step 12.
Remove the earpiece speaker
Pry and remove the ear speaker.
Step 13.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4231
Views
0
Likes
—
Share
10
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Asus instructions most liked by readers
New instructions
Check our
New Asus brand instructions on vrm24.com
