Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Asus Live G500TG (Asus Live) with each step description and the required set of tools.
4305
Views
0
Likes
—
Share
8
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 11 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly.
Step 6.
Remove the coaxial cable
Disconnect connectors and remove the coaxial cable.
Step 7.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the lower PCB.
Step 8.
Remove the sub-board
Disconnect connectors on the lower PCB and remove it.
Step 9.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 10.
Remove the vibration motor
Disconnect connectors on the PCB & pry off vibrator motor.
Step 11.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Step 12.
Remove the motherboard
Remove the PCB.
Step 13.
Remove the earpiece speaker
Pry and remove the earpiece (speaker).
Step 14.
Remove the cable
Pry and remove the flexible flat cable with power & volume buttons.
Step 15.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4305
Views
0
Likes
—
Share
8
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Asus instructions most liked by readers
New instructions
Check our
New Asus brand instructions on vrm24.com
