Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device BQ-5510 Strike Power Max 4G with each step description and the required set of tools.
6045
Views
4
Likes
—
Share
3
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 15 bolts in the frame of the phone.
Step 3.
Open the mid-frame
Remove the middle frame.
Step 4.
Remove the fingerprint sensor
Disconnect the connector and remove the fingerprint scanner and disconnect the battery connector.
⚠ Warning!
We strongly recommend disconnecting the connector to avoid possible short circuit during disassembly.
Step 5.
Disconnect the connectors
Disconnect the connectors on the lower PCB.
Step 6.
Remove the sub-board
Remove the lower PCB.
Step 7.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew the 4 bolts securing the battery.
Step 8.
Remove the battery
Remove the battery.
Step 9.
Remove the rear camera
Disconnect the connector on PCB and remove the main camera.
Step 10.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 2 bolts in the PCB.
Step 11.
Disconnect the connectors
Disconnect the connectors on the PCB.
⚠ Warning!
The connector of the coaxial cable is located on the inside of the board.
Step 12.
Remove the motherboard
Remove the PCB.
Step 13.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
6045
Views
4
Likes
—
Share
3
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top BQ instructions most liked by readers
New instructions
Check our
New BQ brand instructions on vrm24.com
