Disassembly/Repair of the mobile device BQ-6010G Practic with each step description and the required set of tools.
5845
Views
2
Likes
—
Share
3
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 17 screws.
Step 3.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 long screw.
Step 4.
Open the covers
Open the covers.
Step 5.
Unsolder the wires
Unsolder the battery wires. Bend the red one back and attach it by adhesive tape or film to avoid the short circuit.
Step 6.
Disconnect the connectors
Disconnect connectors on the daughterboard and release the wires lead to the microphone.
Step 7.
Remove the sub-board
Remove the daughterboard, also known as sub-board.
Step 8.
Remove the coaxial cable
Pry up the connector and remove the coaxial cable.
Step 9.
Remove the cameras
Disconnect connectors on PCB and remove the main and front (selfie) cameras.
Step 10.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 11.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 screws in the PCB.
Step 12.
Remove the motherboard
Remove the PCB.
Step 13.
In the display frame remained
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
5845
Views
2
Likes
—
Share
3
Questions
Top instructions
Check our
Top BQ instructions most liked by readers
New instructions
Check our
New BQ brand instructions on vrm24.com