Disassembly/Repair of the mobile device Explay Polo with each step description and the required set of tools.

3860

Views

—

Share

4

Questions

Vadim Popoff

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Open the back cover

Step 1.

Open the back cover

Open the back cover.

Remove the battery

Step 2.

Remove the battery

Lift and remove the battery.

Unscrew the screws

Step 3.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts in the frame of the phone.

Open the mid-frame

Step 4.

Open the mid-frame

Pry and remove the middle frame.

Unscrew the screws

Step 5.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.

Disconnect the connectors

Step 6.

Disconnect the connectors

Disconnect connectors on the PCB.

Remove the motherboard

Step 7.

Remove the motherboard

Overturn the board, disconnect the connectors from the inside and remove the board.

Disconnect the connector

Step 8.

Disconnect the connector

Disconnect the lower board with inter-board cable and coaxial cable.

⚠ Warning!

The inter-board cable locates under the label, which must be separated with care.

Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer
Disassembling\Repair has easy complexity and takes about 4 minutes in time. Our manual is suitable for all models Explay Polo or Эксплей Поло released for markets in different countries.
#instructions #Explay #Explay Polo
Detailed disassembly instructions of Explay Polo in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

3860

Views

—

Share

4

Questions

Top instructions

Check our Top Explay instructions most liked by readers

New instructions

Check our New Explay brand instructions on vrm24.com