Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Highscreen Hercules with each step description and the required set of tools.
4284
Views
1
Likes
—
Share
6
Questions
Step 1.
Remove the tray
Using the key tool, open the SIM card tray and remove it.
⚠ Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover
Open the back cover.
Step 3.
Remove the bracket
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the bracket holds the connectors.
Step 4.
Remove the battery
Disconnect connector on the PCB and remove the battery.
Step 5.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts in the lower part.
Step 6.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly.
Step 7.
Remove the sub-board
Disconnect the inter-board cable connector on the main board and remove the lower board with the charging port.
Step 8.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the PCB.
Step 9.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 10.
Remove the motherboard
Remove the PCB.
Step 11.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4284
Views
1
Likes
—
Share
6
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Highscreen instructions most liked by readers
New instructions
Check our
New Highscreen brand instructions on vrm24.com
