Disassembly/Repair of the mobile device Highscreen Power Ice Evo with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Open the back cover.
Step 2.
Lift and remove the battery.
Step 3.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 10 bolts in the frame of the phone.
Step 4.
Pry and remove the middle frame.
Step 5.
In the middle frame, pry and remove the buzzer (speaker)
Step 6.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and disconnect connector of inter-board cable on the lower board and pry up vibration motor.
Step 7.
Remove the lower PCB.
Step 8.
Pry up power & volume button flex cable.
Step 9.
Turn over board with SIM holders and power & volume button flex cable, disconnect the connector from the inside and remove the board.
Step 10.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Step 11.
Disconnect connectors on the PCB.
Step 12.
Remove the PCB.
Step 13.
Pry and remove the earpiece (speaker).
Step 14.
ΠΠ»Π΅ΠΌΠ΅Π½ΡΡ Π½Π° ΡΠ°ΠΌΠΊΠ΅ ΠΌΠΎΠ΄ΡΠ»Ρ.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions