Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Highscreen Razar Pro with each step description and the required set of tools.
3288
Views
1
Likes
—
Share
8
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 15 bolts in the frame of the phone.
Step 3.
Open the mid-frame
Pry and remove the middle frame.
Step 4.
Disconnect the battery connector
Disconnect the battery connector.
⚠ Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 5.
Disconnect the connectors
Disconnect the connectors on the lower PCB.
Step 6.
Remove the sub-board
Remove the lower PCB.
Step 7.
Remove the rear camera
Disconnect the connector on PCB and remove the main camera.
Step 8.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 2 bolts in the PCB.
Step 9.
Disconnect the connectors
Disconnect the connectors on the PCB.
Step 10.
Remove the motherboard
Remove the PCB.
Step 11.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
3288
Views
1
Likes
—
Share
8
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Highscreen instructions most liked by readers
New instructions
Check our
New Highscreen brand instructions on vrm24.com
