en
ru
Take out the caps.
Take out the caps.
Using a screwdriver (hex T4), unscrew 8 bolts on the edges of the phone and remove the side panels.
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 15 bolts.
Lift and turn over the back cover.
Disconnect the fingerprint sensor connector and remove the back cover.
Take out the laying.
Using the key tool, open the SIM cards slot and remove it.
Disconnect the connector and remove the battery.
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 4 bolt in the lower part.
Lift the lower part, unsolder the speaker contacts and remove the part.
Disconnect the connectors on the lower PCB.
Remove the lower PCB
Disconnect the connector on PCB and remove the main camera.
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 3 bolts in the PCB.
Unsolder the contacts on the printed circuit board.
Disconnect the connectors on PCB.
Remove the PCB.
Parts in the frame of the display module.
Disassembling\Repair has easy complexity and takes about 15 minutes in time.
Our manual is suitable for all models HOMTOM ZOJI Z6 released for markets in different countries.
