Disassembly/Repair of the mobile device HTC Desire 600 (HTC Desire 600 PO49110) with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Open the back cover.
Step 2.
Lift and remove the battery.
Step 3.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and using a screwdriver (hex T5), unscrew 8 bolts in the frame of the phone.
Step 4.
Pry and remove the middle frame.
Step 5.
The middle frame.
Step 6.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the main PCB & 1 bolt in the lower board.
Step 7.
Disconnect connectors on the lower PCB and remove it.
Step 8.
Disconnect connectors on the PCB.
Step 9.
Peel back the protective copper layer
Step 10.
Overturn the board, disconnect the connectors from the inside and remove it.
Step 11.
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions