Disassembly/Repair of the mobile device HTC Desire 610 (HTC Desire 610 0P9O201) with each step description and the required set of tools.

4323

Views

—

Share

5

Questions

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Step 1.

Open the back cover

Open the back cover.


Step 2.

Unscrew the screws

Using a screwdriver (hex T5), unscrew the 8 bolts and using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the frame of the phone.


Step 3.

Open the mid-frame

Pry and remove the middle frame.


Step 4.

In the middle cover

The middle frame.


Step 5.

Remove the battery

Disconnect connector on the PCB and remove the battery.


Step 6.

Unscrew the screws

Using a screwdriver (hex T5), unscrew 6 bolts in the lower PCB.


Step 7.

Remove the sub-board

Disconnect connectors on the lower PCB and remove it.


Step 8.

Disconnect the connectors

Disconnect connectors on the PCB and two connectors from the inside.


Step 9.

In the display frame remained

Parts in the frame of the display module.


Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has easy complexity and takes about 4 minutes in time. Our manual is suitable for all models HTC Desire 610 or HTC Desire 610 0P9O201 released for markets in different countries.
Detailed disassembly instructions of HTC Desire 610 in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

4323

Views

—

Share

5

Questions