Disassembly/Repair of the mobile device HTC Desire 828 (HTC Desire 828 2PRE200) with each step description and the required set of tools.

5321

Views

—

Share

13

Questions

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Step 1.

Open the back cover

Open the back cover.

âš  Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.


Step 2.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 14 bolts in the frame of the phone.


Step 3.

Open the mid-frame

Pry and remove the middle frame and disconnect the battery connector.


Step 4.

Disconnect the connectors

Disconnect connectors on the lower PCB.


Step 5.

Remove the sub-board

Remove the lower PCB.


Step 6.

Remove the coaxial cable

Disconnect connector and remove coaxial cable.


Step 7.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.


Step 8.

Disconnect the connectors

Disconnect connectors on the PCB.


Step 9.

Remove the motherboard

Remove the PCB.


Step 10.

In the display frame remained

Parts in the frame of the display module.


Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has easy complexity and takes about 16 minutes in time. Our manual is suitable for all models HTC Desire 828 or HTC Desire 828 2PRE200 released for markets in different countries.
Detailed disassembly instructions of HTC Desire 828 in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

5321

Views

—

Share

13

Questions