Recommended tools
Screwdriver Torx T5
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device HTC Desire SV (HTC Desire SV PM86100) with each step description and the required set of tools.
4051
Views
0
Likes
—
Share
3
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (hex T5), unscrew 8 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Step 6.
Remove the vibration motor
Disconnect connectors on the PCB and pry up vibration motor & power & volume button flex cable.
Step 7.
Turn over the PCB
Overturn the board, disconnect the connector from the inside and remove it.
Step 8.
Remove the holder
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the holder of the charging port & microphone.
Step 9.
Remove the sub-board
Disconnect connectors on the lower PCB and remove it.
Step 10.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4051
Views
0
Likes
—
Share
3
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top HTC instructions most liked by readers
New instructions
Check our
New HTC brand instructions on vrm24.com
