Recommended tools
Screwdriver Torx T5
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device HTC Mozart (HTC Mozart PD67100) with each step description and the required set of tools.
5164
Views
0
Likes
—
Share
3
Questions
Step 1.
Open the cover
Open the bottom cover.
Step 2.
Open the cover
Open the top cover.
Step 3.
Remove the battery
Pull out the battery.
Step 4.
Remove the tab
Unstick the label.
âš Warning!
Under the label locates a connector.
Step 5.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and a screwdriver (hex T5), unscrew 3 bolts.
Step 6.
Open the back cover
Open the back cover.
Step 7.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew the 1 bolt on the side of the phone.
Step 8.
Open the mid-frame
Pry and remove the middle frame.
Step 9.
In the middle cover
The middle frame.
Step 10.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 11.
Remove the motherboard
Remove the PCB.
Step 12.
Remove the LED flashlight
Remove the flash.
Step 13.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
5164
Views
0
Likes
—
Share
3
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top HTC instructions most liked by readers
New instructions
Check our
New HTC brand instructions on vrm24.com
