Recommended tools
Heat gun
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device HTC One X9 with each step description and the required set of tools.
5955
Views
0
Likes
—
Share
4
Questions
Step 1.
Open the back cover
Unglue the panel in the back.
Step 2.
Unscrew the screws
Using a screwdriver (hex T4), unscrew the 2 bolts securing the back cover.
Step 3.
Open the back cover
Open the back cover.
Step 4.
Disconnect the battery connector
Disconnect the battery connector.
Step 5.
Unscrew the screws
Using a screwdriver (hex T4), unscrew 3 bolt in the lower PCB.
Step 6.
Disconnect the connectors
Disconnect the connectors on the lower PCB.
Step 7.
Remove the sub-board
Remove the lower PCB.
Step 8.
Unscrew one screw
Using a screwdriver (hex T4), unscrew the 1 bolt securing the bottom part.
Step 9.
Remove the loudspeaker
Remove the bottom part with a buzzer (speaker).
Step 10.
Remove the front camera
Disconnect the connector on PCB and remove the front (selfie) camera.
Step 11.
Disconnect the connectors
Disconnect the connectors on PCB.
Step 12.
Unscrew the screws
Using a screwdriver (hex T4), unscrew 4 bolts in the PCB.
Step 13.
Remove the motherboard
Remove the PCB.
Step 14.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
5955
Views
0
Likes
—
Share
4
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top HTC instructions most liked by readers
New instructions
Check our
New HTC brand instructions on vrm24.com
