Recommended tools
Screwdriver Torx T5
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device HTC Titan (HTC Titan X310e PI39110) with each step description and the required set of tools.
4819
Views
0
Likes
—
Share
3
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (hex T5), unscrew 8 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Remove the loudspeaker
Pry and remove the buzzer (speaker).
Step 6.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts.
Step 7.
Disconnect the connectors
Disconnect connectors on the lower PCB.
Step 8.
Remove the sub-board
Overturn the board, disconnect the connectors from the inside and remove it.
Step 9.
Remove the vibration motor
Disconnect connector on the PCB and remove vibration motor.
Step 10.
Remove the buttons
Disconnect connector on the PCB and remove power & volume button flex cable.
Step 11.
Remove the motherboard
Remove the PCB.
Step 12.
Remove the earpiece speaker
Pry and remove the earpiece (speaker).
Step 13.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4819
Views
0
Likes
—
Share
3
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top HTC instructions most liked by readers
New instructions
Check our
New HTC brand instructions on vrm24.com
