Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Huawei Ascend G630 (Huawei Ascend G630-U10) with each step description and the required set of tools.
4511
Views
0
Likes
—
Share
4
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 15 screws.
Step 3.
Open the mid-frame
Pry and remove the middle frame.
Step 4.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 screws securing the battery.
Step 5.
Remove the battery
Disconnect the connector on PCB and remove the battery. The battery model of Huawei Ascend G630-U10 is HB4742A0RBC.
Step 6.
Disconnect the connector
Disconnect the connector on PCB.
Step 7.
Remove the motherboard
Remove the PCB.
Step 8.
Remove the proximity sensor
Disconnect the connector on the PCB and remove the proximity sensor.
Step 9.
Remove the cameras
Disconnect connectors on PCB and remove the main and front (selfie) cameras.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4511
Views
0
Likes
—
Share
4
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Huawei instructions most liked by readers
New instructions
Check our
New Huawei brand instructions on vrm24.com
