Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Huawei Honor 3X (Huawei Honor 3X G750-U10 Huawei Ascend G750) with each step description and the required set of tools.
3958
Views
1
Likes
—
Share
4
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 12 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Remove the sub-board
Disconnect connectors on the lower PCB and remove it.
Step 6.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 7.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 8.
Turn over the PCB
Overturn the board, disconnect the connector from the inside and remove it.
Step 9.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
3958
Views
1
Likes
—
Share
4
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Huawei instructions most liked by readers
New instructions
Check our
New Huawei brand instructions on vrm24.com
