Disassembly/Repair of the mobile device Huawei Honor 7A Pro (Huawei Honor 7A Pro (AUM-L29)) with each step description and the required set of tools.

Using the key tool, open the SIM card tray and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Open the back cover.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the brackets hold the connectors.

Disconnect connectors of the fingerprint sensor and battery on the board.

⚠ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts in the lower part.

Pry and remove the buzzer (speaker) assembly.

Disconnect connectors on the lower PCB and remove it.

Disconnect the connector and remove inter-board cable.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the main camera.

Disconnect connector on the PCB and remove the main camera.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the headphone jack/socket.

Disconnect connector on the PCB and remove the front (selfie) camera.

Disconnect connectors on the PCB.

Remove the PCB.

Parts in the frame of the display module.