Disassembly/Repair of the mobile device Huawei Honor 7C Pro (Huawei Honor 7C Pro LND-L29) with each step description and the required set of tools.

8316

Views

—

Share

9

Questions

Vadim Popoff

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Remove the trays

Step 1.

Remove the trays

Using the key tool, open the SIM and Micro SD cards tray and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Unscrew the screws

Step 2.

Unscrew the screws

Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew 2 bolts at the end of the phone.

Open the back cover

Step 3.

Open the back cover

Open the back cover.

Unscrew the screws

Step 4.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts.

Remove the bracket

Step 5.

Remove the bracket

Remove the bracket holding the connectors.

Disconnect the battery connector

Step 6.

Disconnect the battery connector

Disconnect the battery connector. The battery model of Huawei Honor 7C Pro is HB366481ECW-11.

⚠ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Unscrew the screws

Step 7.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts.

Unscrew the screws

Step 8.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts.

Remove the loudspeaker

Step 9.

Remove the loudspeaker

Pry and remove the buzzer (loudspeaker) assembly.

Disconnect the connector

Step 10.

Disconnect the connector

Disconnect the connector on the daughterboard.

Remove the fingerprint sensor

Step 11.

Remove the fingerprint sensor

Pry up the connector and remove the fingerprint sensor.

Remove the bracket

Step 12.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holding the cameras.

Remove the cameras

Step 13.

Remove the cameras

Disconnect the connectors on PCB, and remove the assembly of two rear cameras.

Remove the front camera

Step 14.

Remove the front camera

Disconnect the connector on PCB, and remove the front (selfie) camera.

Unscrew the screws

Step 15.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the PCB.

Remove the motherboard

Step 16.

Remove the motherboard

Remove the PCB.

In the display frame remained

Step 17.

In the display frame remained

Parts are in the frame of the display module.

Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer
Disassembling\Repair has easy complexity and takes about 9 minutes in time. Our manual is suitable for all models Huawei Honor 7C Pro or Huawei Honor 7C Pro LND-L29 released for markets in different countries.
#instructions #Huawei #Huawei Honor 7C Pro
Detailed disassembly instructions of Huawei Honor 7C Pro in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

8316

Views

—

Share

9

Questions

Top instructions

Check our Top Huawei instructions most liked by readers

New instructions

Check our New Huawei brand instructions on vrm24.com