Disassembly/Repair of the mobile device Huawei Honor 8 Pro (Huawei Honor 8 Pro DUK-l09) with each step description and the required set of tools.

8979

Views

—

Share

24

Questions

Vadim Popoff

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Remove the trays

Step 1.

Remove the trays

Using the key tool, open the SIM and Micro SD cards tray and remove it.

âš  Warning!

Do not push too hard this may cause damage.

Unscrew the screws

Step 2.

Unscrew the screws

Using a screwdriver (hex T2), unscrew 2 bolts on the end of the phone.

Open the display module

Step 3.

Open the display module

Separate the LCD from the cover/housing.

Remove the bracket

Step 4.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holding the connectors.

Open the display module

Step 5.

Open the display module

Pry up the connector and remove the display module.

Unscrew the screws

Step 6.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts.

Unscrew the screws

Step 7.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 9 small bolts in the frame of the phone.

Open the mid-frame

Step 8.

Open the mid-frame

Pry and remove the middle frame.

Disconnect the battery connector

Step 9.

Disconnect the battery connector

Disconnect the battery connector.

âš  Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Remove the headphone port

Step 10.

Remove the headphone port

Pry up the connector on PCB and remove the headphone jack/socket.

Remove the sub-board

Step 11.

Remove the sub-board

Disconnect connectors and remove the lower PCB.

Remove the loudspeaker

Step 12.

Remove the loudspeaker

Pry and remove the buzzer (speaker) assembly.

Remove the bracket

Step 13.

Remove the bracket

Remove the bracket and pry up the connector of an inter-board cable on the lower PCB.

Remove the sub-board

Step 14.

Remove the sub-board

Disconnect the connector on PCB, and remove it.

Remove the bracket

Step 15.

Remove the bracket

Remove the brackets.

Remove the cameras

Step 16.

Remove the cameras

Disconnect connectors on PCB and remove the main and front (selfie) cameras.

In the housing remained

Step 17.

In the housing remained

The back cover/housing.

Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer
Disassembling\Repair has easy complexity and takes about 10 minutes in time. Our manual is suitable for all models Huawei Honor 8 Pro or Huawei Honor 8 Pro DUK-l09 released for markets in different countries.
#instructions #Huawei #Huawei Honor 8 Pro
Detailed disassembly instructions of Huawei Honor 8 Pro in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

8979

Views

—

Share

24

Questions

Top instructions

Check our Top Huawei instructions most liked by readers

New instructions

Check our New Huawei brand instructions on vrm24.com