Disassembly/Repair of the mobile device Huawei Honor 8C (Huawei Honor 8C BKK-L21, BKK-LX2, BKK-LX1, BKK-L21 (Global); BKK-AL00, BKK-TL00, BKK-AL10 (China)) with each step description and the required set of tools.

13017

Views

—

Share

4

Questions

Vadim Popoff

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Remove the trays

Step 1.

Remove the trays

Using the key tool, open the SIM and Micro SD cards tray and remove it.

âš  Warning!

Do not push too hard this may cause damage.

Open the back cover

Step 2.

Open the back cover

Open the back cover and turn it over.

Remove the bracket

Step 3.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the bracket holding the connectors.

Open the cover

Step 4.

Open the cover

Pry up the fingerprint sensor connector and remove the cover. 

Disconnect the battery connector

Step 5.

Disconnect the battery connector

Disconnect the battery connector. The battery model of Huawei Honor 8C is HB406689ECW.

âš  Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Unscrew the screws

Step 6.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts at the bottom. 

Remove the loudspeaker

Step 7.

Remove the loudspeaker

Pry and remove the buzzer (loudspeaker) assembly.

Remove the interconnect cable

Step 8.

Remove the interconnect cable

Disconnect connectors and remove the inter-board cable.

Disconnect the connector

Step 9.

Disconnect the connector

Disconnect the connector on the daughterboard.

Remove the sub-board

Step 10.

Remove the sub-board

Remove the daughterboard, also known as sub-board.

Unscrew the screws

Step 11.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts.

Open the cover

Step 12.

Open the cover

Pry up the cover.

Remove the cameras

Step 13.

Remove the cameras

Disconnect connectors on PCB and remove the assembly of the two rear cameras. Also, remove the front (selfie) camera.

Unscrew the screws

Step 14.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.

Disconnect the connectors

Step 15.

Disconnect the connectors

Disconnect connectors on the PCB.

Remove the motherboard

Step 16.

Remove the motherboard

Remove the PCB.

In the display frame remained

Step 17.

In the display frame remained

Parts are in the frame of the display module.

Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer
Disassembling\Repair has easy complexity and takes about 8 minutes in time. Our manual is suitable for all models Huawei Honor 8C or Huawei Honor 8C BKK-L21, BKK-LX2, BKK-LX1, BKK-L21 (Global); BKK-AL00, BKK-TL00, BKK-AL10 (China) released for markets in different countries.
#instructions #Huawei #Huawei Honor 8C
Detailed disassembly instructions of Huawei Honor 8C in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

13017

Views

—

Share

4

Questions

Top instructions

Check our Top Huawei instructions most liked by readers

New instructions

Check our New Huawei brand instructions on vrm24.com