Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Huawei MediaPad T1 7'' (Huawei MediaPad T1-701U) with each step description and the required set of tools.
9628
Views
2
Likes
—
Share
8
Questions
Step 1.
Unscrew one screw
Open SIM micro SD card cover and using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt securing the display module.
Step 2.
Open the display module
Separate the display module from the cover.
Step 3.
Remove the bracket
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holding the battery connector.
Step 4.
Disconnect the battery connector
Disconnect the battery connector. The battery model of Huawei MediaPad T1 is HB3G1.
⚠ Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 5.
Disconnect the connector
Pry up the display module connector.
Step 6.
Remove the bracket
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the bracket holding the charging port.
Step 7.
Remove the front camera
Disconnect the connector on PCB, and remove the front (selfie) camera.
Step 8.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts securing the buzzer (speaker) assembly.
Step 9.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly.
Step 10.
Remove the motherboard
Remove the PCB.
Step 11.
Remove the rear camera
Disconnect the connector on PCB, and remove the main camera.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
9628
Views
2
Likes
—
Share
8
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Huawei instructions most liked by readers
New instructions
Check our
New Huawei brand instructions on vrm24.com
