Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Huawei MediaPad T3 (7'') BG2-w09 (Huawei MediaPad T3 (7'') (BG2-w09)) with each step description and the required set of tools.
16021
Views
0
Likes
—
Share
23
Questions
Step 1.
Open the display module
Separate the display module.
Step 2.
Remove the bracket
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the bracket holds the battery and the sim card connector.
Step 3.
Remove the bracket
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolts and remove the bracket holds the connector of LCD.
Step 4.
Open the display
Disconnect connector on the PCB and remove the LCD.
Step 5.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Step 6.
Remove the bracket
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the bracket holds the charging port.
Step 7.
Remove the front camera
Disconnect connector on the PCB and remove the front-facing camera.
Step 8.
Remove the bracket
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the main camera.
Step 9.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 10.
Remove the motherboard
Remove the PCB.
Step 11.
In the housing remained
Parts in the cover (housing).
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
16021
Views
0
Likes
—
Share
23
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Huawei instructions most liked by readers
New instructions
Check our
New Huawei brand instructions on vrm24.com
