Russian
Separate the display module from the cover.
⚠️ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Teardown difficulty:
Moderate
Moderate
Duration:
10 min
10 min
Recommended tools
Disassembly of the mobile device Huawei MediaPad T3 (7'') BG2-u01 (Huawei MediaPad T3 7.0'' BG2-u01) with each step description and the required set of tools.
Step 1
Step 2
Carefully elevate the display module, disconnect the connector, and remove the display.
Step 3
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 screw, and remove the bracket holding the battery connector.
Step 4
Disconnect the battery connector. The battery model of Huawei MediaPad T3 is HB3G1.
⚠️ Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 5
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 screws.
Step 6
Remove the cover with an earpiece speaker.
Step 7
Disconnect connectors on PCB and remove the main and front (selfie) cameras.
Step 8
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 screws, and remove the bracket holding the charging port and a microphone.
Step 9
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 screws.
Step 10
Lift the vibration motor, release the wires leading to the vibration motor, and remove the PCB.
Step 11
Parts are in the frame of the display module.
Detailed disassembly instructions of Huawei MediaPad T3 (7'') BG2-u01 in the video, made by our mobile repair & service center:
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Disassembling\Repair has medium complexity and takes about 10 minutes in time.
Our manual is suitable for all models Huawei MediaPad T3 (7'') BG2-u01 — Huawei MediaPad T3 7.0'' BG2-u01 released for markets in different countries.
Back to the list
