Russian
Spanish
Portuguese
Using the key tool, open the SIM card tray and remove it.
⚠️ Warning!
Do not push too hard this may cause damage.
Teardown difficulty:
Hard
Hard
Duration:
12 min
12 min
Recommended tools
Disassembly/Repair of the mobile device Huawei Nova 2 (Huawei Nova 2 PIC-L09 PIC-LX9 PIC-AL00 PIC-TL00) with each step description and the required set of tools.
Step 2.
Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew the 2 bolts on the end of the phone.
Step 3.
Separate the display module from cover.
⚠️ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Step 4.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the connectors.
Step 5.
Disconnect the connectors of the display module and the battery on the PCB and remove the display module.
Step 9.
Disconnect the coaxial cable connector on the main board and remove the lower PCB with a charging port.
Detailed disassembly instructions of Huawei Nova 2 in the video, made by our mobile repair & service center:
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Disassembling\Repair has hard complexity and takes about 12 minutes in time.
Our manual is suitable for all models Huawei Nova 2 — Huawei Nova 2 PIC-L09 PIC-LX9 PIC-AL00 PIC-TL00 released for markets in different countries.
Back to the list