Disassembly/Repair of the mobile device Huawei Nova 2i (Huawei Nova 2i (RNE-L21) HUAWEI Mate 10 lite) with each step description and the required set of tools.

17090

Views

—

Share

12

Questions

Vadim Popoff

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Remove the tray

Step 1.

Remove the tray

Using the key tool, open the SIM card slot and remove it.

âš  Warning!

Do not push too hard this may cause damage.

Unscrew the screws

Step 2.

Unscrew the screws

Using a screwdriver (hex T2), unscrew the 2 bolts on the end of the phone.

Open the back cover

Step 3.

Open the back cover

Open the back cover.

Remove the bracket

Step 4.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the brackets hold the connectors.

Remove the fingerprint sensor

Step 5.

Remove the fingerprint sensor

Disconnect the fingerprint sensor connector and remove the back cover.

Disconnect the battery connector

Step 6.

Disconnect the battery connector

Disconnect the battery connector.

âš  Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Remove the bracket

Step 7.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the lower PCB and remove the bracket holds the connector.

Remove the interconnect cable

Step 8.

Remove the interconnect cable

Disconnect connectors and remove inter-board cable.

Remove the loudspeaker

Step 9.

Remove the loudspeaker

Pry and remove the lower part with buzzer (speaker).

Remove the sub-board

Step 10.

Remove the sub-board

Disconnect connectors on the lower PCB and remove it.

Unscrew one screw

Step 11.

Unscrew one screw

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.

Remove the bracket

Step 12.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the front cameras.

Remove the cameras

Step 13.

Remove the cameras

Disconnect connectors on the PCB and remove the front-facing cameras.

Remove the bracket

Step 14.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds cameras.

Disconnect the connectors

Step 15.

Disconnect the connectors

Disconnect connectors on the PCB.

Remove the motherboard

Step 16.

Remove the motherboard

Remove the PCB.

Remove the cameras

Step 17.

Remove the cameras

Remove the main cameras.

In the display frame remained

Step 18.

In the display frame remained

Parts in the frame of the display module.

Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has easy complexity and takes about 14 minutes in time.
Our manual is suitable for all models Huawei Nova 2i — Huawei Nova 2i (RNE-L21) HUAWEI Mate 10 lite released for markets in different countries.

Detailed disassembly instructions of Huawei Nova 2i in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

17090

Views

—

Share

12

Questions

Top instructions

Check our Top Huawei instructions most liked by readers

New instructions

Check our New Huawei brand instructions on vrm24.com