Huawei P10

Teardown difficulty:
Hard

Duration:
12 min

Recommended tools

Screwdriver five-point p0.8 mm

Screwdriver phillips #000

Opening tool / spudger

Tweezers

Disassembly/Repair of the mobile device Huawei P10 (Huawei P10 VTR-L09, VTR-L29 (Global); VTR-AL00 & VTR-TL00 (China)) with each step description and the required set of tools.

Vadim Popoff

Author, content manager

Specialist in content creation, distribution and content management.

Step 1.

Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew the 2 bolts on the end of the phone.

Step 2.

Using the key tool, open the SIM card and MMC card tray and remove it.

⚠️ Warning!

Do not push too hard this may cause damage.

Step 3.

Separate the display module from the cover.

Step 4.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the connectors.

Step 5.

Disconnect the battery connector.

⚠️ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Step 6.

Disconnect the fingerprint sensor connector.

Step 7.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts and remove the bracket holds the connectors.

Step 8.

Disconnect connectors and remove inter-board cable & coaxial cable.

Step 9.

Disconnect connectors on the lower PCB.

How to disassemble Huawei P10, Step 10/1

How to disassemble Huawei P10, Step 10/2

Step 10.

Remove the lower PCB.

How to disassemble Huawei P10, Step 11/1

How to disassemble Huawei P10, Step 11/2

Step 11.

Pry and remove the buzzer (speaker) assembly.

How to disassemble Huawei P10, Step 12/1

How to disassemble Huawei P10, Step 12/2

Step 12.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts and remove the bracket holds the connectors.

How to disassemble Huawei P10, Step 13/1

How to disassemble Huawei P10, Step 13/2

How to disassemble Huawei P10, Step 13/3

Step 13.

Disconnect connectors on the PCB.

How to disassemble Huawei P10, Step 14/1

How to disassemble Huawei P10, Step 14/2

Step 14.

Disconnect connectors on the PCB and remove the main and front (selfie) cameras.

How to disassemble Huawei P10, Step 15/1

How to disassemble Huawei P10, Step 15/2

Step 15.

Remove the PCB.

How to disassemble Huawei P10, Step 16/1

How to disassemble Huawei P10, Step 16/2

Step 16.

Pry up vibration motor & the headphone jack/socket.

How to disassemble Huawei P10, Step 17/1

How to disassemble Huawei P10, Step 17/2

How to disassemble Huawei P10, Step 17/3

Step 17.

Parts in the frame of the display module.

Detailed disassembly instructions of Huawei P10 in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

#instructions #Huawei #Huawei P10

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has hard complexity and takes about 12 minutes in time.
Our manual is suitable for all models Huawei P10 — Huawei P10 VTR-L09, VTR-L29 (Global); VTR-AL00 & VTR-TL00 (China) released for markets in different countries.

Back to the list