Disassembly/Repair of the mobile device Huawei P9 Lite (Huawei P9 Lite (VNS-L21) Huawei G9 Lite, Honor 8 Smart (India) Huawei L31 / L22 / for US L23 / L53) with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Open the back cover.
âš Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Step 2.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 9 bolts.
Step 3.
Turn over the cover with the fingerprint sensor.
Step 4.
Disconnect the fingerprint sensor connector.
Step 5.
Disconnect the battery connector.
âš Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 6.
Disconnect the NFC connector and remove the cover.
Step 7.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.
Step 8.
Pry and remove the buzzer (speaker) assembly.
Step 9.
Disconnect connectors on the PCB remove the inter-board cable & coaxial cable.
Step 10.
Remove the lower PCB.
Step 11.
Disconnect connector on the PCB and remove the main camera.
Step 12.
Disconnect connectors on the PCB.
Step 13.
Remove the PCB.
Step 14.
Disconnect connector on the PCB and remove the headphone jack/socket & earpiece (speaker).
Step 15.
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions