Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Lenovo P70 (Lenovo P70 P70-A \ P70-T \ P700i) with each step description and the required set of tools.
7123
Views
0
Likes
—
Share
47
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts in the frame of the phone.
Step 3.
Open the mid-frame
Pry and remove the middle frame.
Step 4.
Remove the battery
Disconnect connector on the PCB and remove the battery.
Step 5.
Remove the loudspeaker
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the buzzer (speaker) assembly and remove it with the microphone cover.
Step 6.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the lower PCB.
Step 7.
Remove the sub-board
Disconnect connectors on the lower PCB and remove it.
Step 8.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.
Step 9.
Disconnect the connector
Disconnect connectors on the PCB and pry up the power & volume buttons flex cable.
Step 10.
Remove the cameras
Disconnect connectors on the PCB and remove the main and front (selfie) cameras.
âš Warning!
The front camera locates under the touchscreen flat cable. Pry it up carefully.
Step 11.
Turn over the PCB
Turn over PCB.
Step 12.
Remove the motherboard
Disconnect connectors on the PCB and remove it.
Step 13.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
7123
Views
0
Likes
—
Share
47
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Lenovo instructions most liked by readers
New instructions
Check our
New Lenovo brand instructions on vrm24.com
