Disassembly/Repair of the mobile device Lenovo P780 with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Open the back cover.
Step 2.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts in the frame of the phone.
Step 3.
Pry and remove the middle frame and keys of the volume and power buttons.
Step 4.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts securing the battery.
Step 5.
Remove the battery cover.
Step 6.
Disconnect connector on the PCB and remove the battery.
Step 7.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the cover with antennas.
Step 8.
Disconnect connectors on the PCB and pry up the volume buttons flex cable.
Step 9.
Overturn the board, disconnect the connector from the inside and remove it.
Step 10.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the buzzer (speaker) assembly.
Step 11.
Disconnect connectors on the lower PCB and remove the board and coaxial cable.
âš Warning!
The inter-board cable connector is on the inside.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions