Disassembly/Repair of the mobile device Lenovo S5000 IdeaTab (Lenovo IdeaTab S5000-h) with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Using the key tool, open the SIM card tray and remove it.
âš Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover.
Step 3.
Remove keys of the volume and power buttons.
Step 4.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts securing the battery connector.
Step 5.
Disconnect connector on the PCB and remove the battery.
Step 6.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew the 2 bolts securing the board with SIM holder, disconnect the cable and remove it.
Step 7.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the buzzer (speaker) assembly.
Step 8.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 9 bolts.
Step 9.
Pry and remove the middle frame.
Step 10.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts securing the cover with antennas.
Step 11.
Remove the cover with antennas.
Step 12.
Disconnect connectors on the PCB and pry & remove coaxial cables.
Step 13.
Disconnect connector on the lower PCB, pry up the vibration motor and remove the board.
Step 14.
Disconnect connectors on the PCB and pry up the power & volume buttons flex cable.
Step 15.
Disconnect connectors on the PCB and remove the main and front (selfie) cameras.
Step 16.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Step 17.
Remove the PCB.
Step 18.
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions