Recommended tools
Heat gun
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Lenovo S580 with each step description and the required set of tools.
4161
Views
0
Likes
—
Share
11
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Step 6.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 7.
Remove the microphone
Disconnect connectors on the PCB and pry up the microphone.
Step 8.
Remove the protective film
Peel back the protective layer.
Step 9.
Remove the motherboard
Remove the PCB.
Step 10.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4161
Views
0
Likes
—
Share
11
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Lenovo instructions most liked by readers
New instructions
Check our
New Lenovo brand instructions on vrm24.com
