Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Lenovo S820 with each step description and the required set of tools.
4668
Views
0
Likes
—
Share
9
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Remove the buttons
Remove the keys of the volume buttons.
Step 6.
Remove the sub-board
Disconnect the coaxial cable connector on the lower PCB, lift the board, disconnect the connector from the inside and remove the board.
Step 7.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Step 8.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 9.
Remove the sub-board
Overturn the board, disconnect the connectors from the inside and remove it.
Step 10.
In the display frame remained
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4668
Views
0
Likes
—
Share
9
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Lenovo instructions most liked by readers
New instructions
Check our
New Lenovo brand instructions on vrm24.com
