Disassembly/Repair of the mobile device Lenovo Tab 4 Plus TB-8704X with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Using the key tool, open the SIM cards tray and remove it.
âš Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover.
âš Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Step 3.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 11 bolts and remove the bracket holding the connectors.
Step 4.
Disconnect the battery connector. The battery model of Lenovo Tab 4 Plus TB-8704X is L16D1P34.
âš Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 5.
Remove the cover with antennas.
Step 6.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 long bolts.
Step 7.
Peel back the protective layer.
Step 8.
Pry up the connector and remove the board with Sim holders.
Step 9.
Disconnect the connector on PCB, and remove the main camera.
Step 10.
Disconnect the connector on PCB, and remove the front (selfie) camera.
Step 11.
Disconnect connectors on the PCB.
Step 12.
Remove the PCB.
Step 13.
Unsolder the wires and remove the loud speaker assembly.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions