Disassembly/Repair of the mobile device Lenovo Vibe Z K910 with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Using the key tool, open the SIM cards tray and remove it.
âš Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover.
Step 3.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts in the frame of the phone.
Step 4.
Pry and remove the middle frame.
Step 5.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the connector and battery.
Step 6.
Disconnect connector on the PCB and remove the front (selfie) camera.
Step 7.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Step 8.
Overturn the board, disconnect connectors from the inside and remove it.
Step 9.
Pry and remove the buzzer (speaker) assembly.
Step 10.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts securing the charging port and remove the inter-board cable.
Step 11.
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions