Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device LG G Pro Lite D686 with each step description and the required set of tools.
5295
Views
0
Likes
—
Share
8
Questions
Step 1.
Remove the stylus pen
Pull out the stylus pen.
Step 2.
Open the back cover
Open the back cover.
Step 3.
Remove the battery
Lift and remove the battery.
Step 4.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 13 bolts in the frame of the phone.
Step 5.
Open the mid-frame
Pry and remove the middle frame.
Step 6.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly.
Step 7.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the lower PCB.
Step 8.
Remove the sub-board
Disconnect connectors on the lower PCB and remove it.
Step 9.
Remove the cameras
Disconnect connectors on the PCB and remove the main and front (selfie) cameras.
Step 10.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 11.
Remove the motherboard
Remove the PCB.
Step 12.
In the display frame remained
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
5295
Views
0
Likes
—
Share
8
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top LG instructions most liked by readers
New instructions
Check our
New LG brand instructions on vrm24.com
