Disassembly/Repair of the mobile device Meizu M3s mini Y685H with each step description and the required set of tools.

6779

Views

—

Share

4

Questions

Vadim Popoff

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Remove the tray

Step 1.

Remove the tray

Using the key tool, open the SIM card tray and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Unscrew the screws

Step 2.

Unscrew the screws

Using a screwdriver (Tri-Wing Precision Screwdriver 0.8mm), unscrew the 2 bolts on the end of the phone.

Open the back cover

Step 3.

Open the back cover

Open the back cover.

Remove the bracket

Step 4.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the flat bracket/bar holds the connectors.

Remove the battery

Step 5.

Remove the battery

Disconnect connector on the PCB and remove the battery.

Unscrew the screws

Step 6.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts.

Remove the loudspeaker

Step 7.

Remove the loudspeaker

Pry and remove the buzzer (speaker) assembly.

Remove the interconnect cable

Step 8.

Remove the interconnect cable

Disconnect connectors and remove the inter-board cable.

Disconnect the connectors

Step 9.

Disconnect the connectors

Disconnect connectors on the lower PCB.

Unscrew one screw

Step 10.

Unscrew one screw

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the lower PCB.

Remove the small board

Step 11.

Remove the small board

Remove the PCB and microphone cover.

Remove the bracket

Step 12.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the Home button.

Remove the Home button

Step 13.

Remove the Home button

Remove the Home button.

Unscrew the screws

Step 14.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts in the PCB.

Remove the cable

Step 15.

Remove the cable

Pry up the connector and remove the power & volume buttons flex cable and headphone jack/socket.

Disconnect the connector

Step 16.

Disconnect the connector

Disconnect the connector on the PCB.

Remove the motherboard

Step 17.

Remove the motherboard

Remove the PCB.

Remove the earpiece speaker

Step 18.

Remove the earpiece speaker

Pry and remove the earpiece (speaker).

In the display frame remained

Step 19.

In the display frame remained

Parts are in the frame of the display module.

Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer
Disassembling\Repair has medium complexity and takes about 9 minutes in time. Our manual is suitable for all models Meizu M3s mini Y685H or Мейзу М3 эс мини released for markets in different countries.
#instructions #Meizu #Meizu M3s mini Y685H
Detailed disassembly instructions of Meizu M3s mini Y685H in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

6779

Views

—

Share

4

Questions

Top instructions

Check our Top Meizu instructions most liked by readers

New instructions

Check our New Meizu brand instructions on vrm24.com