Recommended tools

Screwdriver Five-point P0.8 mm

Screwdriver Phillips #000

Opening tool / Spudger

Tweezers

Disassembly/Repair of the mobile device Meizu Pro 6 M570H (Meizu Pro 6 (M570H)) with each step description and the required set of tools.

5577

Views

Likes

—

Questions

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Step 1.

Remove the tray

Using the key tool, open the SIM card slot and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Step 2.

Unscrew the screws

Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew the 2 bolts on the end of the phone securing the LCD.

Step 3.

Open the display module

Lift the display module and peel back the protective layer.

Step 4.

Remove the bracket

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts and remove the brackets hold the connectors.

Step 5.

Open the display module

Lift the display module and disconnect the display and touchscreen connectors and remove the display module.

Step 6.

Remove the protective film

Remove the protective layer.

Step 7.

Disconnect the battery connector

Disconnect the battery connector and remove it.

⚠ Warning!

The connector is not connected directly to the board, but through the connector of an FFC cable of volume and on/off buttons, which in turn is connected to the printed circuit board.

Step 8.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the lower PCB.

Step 9.

Disconnect the connector

Disconnect connector on the lower part with buzzer (speaker) and remove it.

Step 10.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts.

Step 11.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.

Step 12.

Unscrew the screws

Using a screwdriver (hex T4), unscrew the 4 bolts.

Step 13.

Remove the frame

Remove the frame/bracket.

Step 14.

Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts.

Step 15.

Remove the frame

Remove the frame/bracket.

Step 16.

Remove the motherboard

Remove the PCB.

Step 17.

In the display frame remained

Parts in the frame of the display module.

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has medium complexity and takes about 19 minutes in time. Our manual is suitable for all models Meizu Pro 6 M570H or Meizu Pro 6 (M570H) released for markets in different countries.

#instructions #Meizu #Meizu Pro 6 M570H