Teardown difficulty:
Easy
Duration:
8 min

Recommended tools

Disassembly/Repair of the mobile device Micromax Bolt A82 with each step description and the required set of tools.


Specialist in content creation, distribution and content management.


How to disassemble Micromax Bolt A82, Step 1/1 How to disassemble Micromax Bolt A82, Step 1/2

Step 1. Open the back cover

Using a spudger or a plastic pick, carefully, around the edge, detach the back cover clips, and remove it.

Do not insert the tool deeply or bend it. Otherwise, the housing may be tampered with or damaged.

⚠ī¸ Be careful when opening the cover from the volume and power buttons side. Thin cable and fragile buttons are straightforward to damage.


How to disassemble Micromax Bolt A82, Step 2/1 How to disassemble Micromax Bolt A82, Step 2/2

Step 2. Remove the battery

Carefully remove the battery.

ℹī¸ī¸ The Micromax Bolt A82 model has a battery Micromax A82 with 1800 mAh capacity (aka rechargeable battery).


How to disassemble Micromax Bolt A82, Step 3/1 How to disassemble Micromax Bolt A82, Step 3/2

Step 3. Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 screws.


How to disassemble Micromax Bolt A82, Step 4/1 How to disassemble Micromax Bolt A82, Step 4/2

Step 4. Open the middle cover

Pry and remove the middle cover.

Try to lift the cover by the edges and not push anything between them to not accidentally touch or short-circuit anything on the motherboard.


How to disassemble Micromax Bolt A82, Step 5/1 How to disassemble Micromax Bolt A82, Step 5/2 How to disassemble Micromax Bolt A82, Step 5/3 How to disassemble Micromax Bolt A82, Step 5/4 How to disassemble Micromax Bolt A82, Step 5/5

Step 5. Disconnect the connectors

Pry up the connectors of the display, touchscreen.

Also, release from the display module frame the side buttons cable, vibration motor, and microphone.

⚠ī¸ Be careful when removing the cables from the connectors, the cables are pretty thin, and it is easy enough to break them or damage the contact tracks inside.


How to disassemble Micromax Bolt A82, Step 6/1 How to disassemble Micromax Bolt A82, Step 6/2

Step 6. Unscrew the screws

Using a screwdriver (Philips 1.5 mm PH000), unscrew three screws securing the motherboard.


How to disassemble Micromax Bolt A82, Step 7/1 How to disassemble Micromax Bolt A82, Step 7/2

Step 7. Remove the motherboard

Carefully remove the printed circuit board. There is no need to use a lever or try to reach the board by force. Make sure that nothing is getting in the way or holding the board.

⚠ī¸ Do not bend the circuit board when removing it or push tools under it. Unbeknownst to yourself, you can damage components or cables from the inside.


How to disassemble Micromax Bolt A82, Step 8/1 How to disassemble Micromax Bolt A82, Step 8/2 How to disassemble Micromax Bolt A82, Step 8/3

Step 8. In the display frame remained

ℹī¸ī¸ In the display frame remained: the earpiece speaker.

Detailed disassembly instructions of Micromax Bolt A82 in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.


Disassembling\Repair has easy complexity and takes about 8 minutes in time. Our manual is suitable for all models Micromax Bolt A82 released for markets in different countries.



Back to the list
˄˅

Advertisement

˃˂

Advertisement