Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Micromax Canvas 5 Lite Q462 with each step description and the required set of tools.
3418
Views
0
Likes
—
Share
3
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Remove the battery. The battery model of Micromax Canvas 5 Lite has the same name.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 14 screws.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Disconnect the connectors
Disconnect connectors on the daughterboard
Step 6.
Remove the sub-board
Remove the daughterboard, also known as sub-board with an earpiece speaker and vibration motor.
Step 7.
Remove the coaxial cable
Pry up the connector and remove the coaxial cable.
Step 8.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 screws in the PCB.
Step 9.
Remove the cameras
Disconnect connectors on PCB and remove the main and front (selfie) cameras.
Step 10.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 11.
Remove the motherboard
Remove the PCB.
Step 12.
In the display frame remained
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
3418
Views
0
Likes
—
Share
3
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Micromax instructions most liked by readers
New instructions
Check our
New Micromax brand instructions on vrm24.com
