Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Micromax Canvas Pace Q415 with each step description and the required set of tools.
5516
Views
2
Likes
—
Share
3
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 9 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame and keys of the power buttons.
Step 5.
Remove the loudspeaker
Pry and remove the buzzer (speaker).
Step 6.
Remove the sub-board
Disconnect the connectors on the main PCB, pry up the vibration motor and microphone and remove the lower board with inter-board cable. Also remove the coaxial cable.
⚠ Warning!
The inter-board cable locates under the layer (sticker). It's better to peel back the protective layer previously.
Step 7.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 8.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Step 9.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 10.
Remove the motherboard
Remove the PCB.
Step 11.
Remove the earpiece speaker
Pry and remove the earpiece (speaker).
Step 12.
In the display frame remained
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
5516
Views
2
Likes
—
Share
3
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Micromax instructions most liked by readers
New instructions
Check our
New Micromax brand instructions on vrm24.com
