Disassembly/Repair of the mobile device Nokia 3 (2017) TA-1032 with each step description and the required set of tools.
Views
Likes
Share
Questions
Step 1.
Using the key tool, open the SIM card and MMC card trays and remove them.
⚠ Warning!
Do not push too hard this may cause damage.
Step 2.
Open the back cover.
Step 3.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.
Step 4.
Pry & remove the upper cover.
Step 5.
Disconnect the battery connector.
⚠ Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Step 6.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.
Step 7.
Remove the lower cover.
Step 8.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the lower PCB.
Step 9.
Disconnect connectors on the lower PCB.
Step 10.
Remove the lower PCB.
Step 11.
Disconnect connector on the PCB and remove the main camera.
Step 12.
Disconnect connector on the PCB and remove the front (selfie) camera.
Step 13.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Step 14.
Disconnect connectors on the PCB.
Step 15.
Remove the PCB.
Step 16.
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Views
Likes
Share
Questions