Recommended tools
Screwdriver Torx T5
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Nokia X RM-980 (Nokia Normandy, Nokia A110, Nokia X Dual SIM RM-980) with each step description and the required set of tools.
5848
Views
0
Likes
—
Share
3
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (hex T5), unscrew 11 bolts in the frame of the phone.
Step 4.
Open the display module
Lift up the display module.
Step 5.
Disconnect the connectors
Pry up connectors on the PCB and separate the frame with the module from the frame with the PCB.
Step 6.
In the display frame remained
The display module.
Step 7.
Remove the rear camera
Disconnect the connector on PCB, and remove the main camera.
Step 8.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 9.
Remove the motherboard
Remove the PCB.
Step 10.
Remove the vibration motor
Pry and remove the cable with headphone jack/socket and vibration motor.
Step 11.
In the middle cover
The middle frame.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
5848
Views
0
Likes
—
Share
3
Questions
Related Instructions
Related Reviews
Related Blog
Popular Questions
D
Nokia 6.1 TA-1043
Entonces si tengo que cambiar el cristal de atrás tengo que sacarlo todo o bien ese sà se puede quitar por detrás? 🙏🙏👍
David Marinez9
A
Nokia 6.1 TA-1043
Yo comprĂ© este telĂ©fono hace 1 o 2 años, y siempre me dio curiosidad saber cĂłmo era por dentro ya que no tenĂa una tapa ni nada para abrirlo, ya se c…
Andres Acosta5
Nokia 8800 Sirocco RM-165
DeĂ r sir/madam, I write from kisii Kenya, inquiring where your service center in Kenya to help me repair this type of phone.
sharon
F
Nokia 8 TA-1004
@VRM24.com What is the model number on the battery? My batter has swollen up and push open the screen on one side. I am looking for a replacement.
Frederick Henderson5
L
Nokia 6 (2017) TA-1021
how do you replace the earpiece speaker...looks like it is attached to a ribbon cable..
lance wolf11Top instructions
Check our
Top Nokia instructions most liked by readers
New instructions
Check our
New Nokia brand instructions on vrm24.com
