Recommended tools
Heat gun
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device OnePlus X E1001 (One Plus X E1001 / E1003 / E1005) with each step description and the required set of tools.
5115
Views
1
Likes
—
Share
13
Questions
Step 1.
Open the back cover
Open the back cover.
âš Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Step 2.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.
Step 3.
Open the cover
Open the upper cover.
Step 4.
Remove the battery
Disconnect connector on the PCB and remove the battery.
Step 5.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts in the lower part.
Step 6.
Remove the loudspeaker
Pry and remove the buzzer (speaker) assembly.
Step 7.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 8.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 9.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Step 10.
Turn over the PCB
Overturn the board, disconnect the connector from the inside and remove it.
Step 11.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the lower PCB.
Step 12.
Remove the vibration motor
Disconnect the coaxial cable connector and pry up the vibration motor.
Step 13.
Remove the sub-board
Remove the lower PCB with inter-board cable, vibration motor and charging port.
Step 14.
Remove the earpiece speaker
Pry and remove the earpiece (speaker).
Step 15.
In the display frame remained
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
5115
Views
1
Likes
—
Share
13
Questions
Related Instructions
Related Reviews
Related Blog
Popular Questions
A
OnePlus X E1001
Your videos are good.. I would like to ask for your help, I have an alcatel 6932a recently the chip got stuck and I messed up the pins and I haven't …
ANONYMUSMEX9
R
OnePlus X E1001
Total work and video quality. Success!
Rod Damacela4
OnePlus 7 Pro
Where do I find the sensor board as I feel my gyro is not working. When I move at least the arrow changes location which may mean accelerometer is fi…
vivekanand
OnePlus 9RT 5G
My OnePlus 9rt wifi and hotspot Stop working. I visited OnePlus care they say my motherboard have problem it's need to change and it's so expensive …
gaurav
E
OnePlus 3 A3003
Is the friend Brazilian? If so, I'd like to get in touch with you, because I have my OP3T with a cracked display needing replacement. I'd appreciate …
Eduardo Nascimento2Top instructions
Check our
Top OnePlus instructions most liked by readers
New instructions
Check our
New OnePlus brand instructions on vrm24.com
