Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew 2 screws at the end of the phone.

Lift the back cover up.

Pry up the fingerprint sensor and turn it over.

Remove the bracket.

Pry up the connector of the cable with a charging port and remove the back cover.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 screws and remove the bracket holding the connectors.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 screws.

Pry and remove the buzzer (loudspeaker) assembly.

Disconnect connectors on the daughterboard.

Remove the daughterboard, also known as sub-board.

Disconnect connectors and remove the inter-board cable.

Pry up the coaxial cable connector.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 screws and remove the bracket holding the camera's connectors.

Disconnect the connector on PCB, and remove the front (selfie) camera.

Disconnect the connector on PCB, and remove the two rear cameras assembly.

Remove the PCB.

Parts are in the frame of the display module.