Recommended tools
Heat gun
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Samsung Galaxy A3 (2016) SM-A310 (A310F (Europe); A310F/DS (Global Dual-SIM); A310M (LATAM); A310M (LATAM, Brazil); A310Y (Australia, New Zealand)) with each step description and the required set of tools.
19719
Views
2
Likes
—
Share
245
Questions
Step 1.
Open the back cover
Open the back cover.
⚠ Warning!
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Step 2.
Remove the trays
Using the key tool, open the SIM and Micro SD cards tray and remove it.
⚠ Warning!
Do not push too hard this may cause damage.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 16 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
⚠ Warning!
The frame is glued firmly. For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Step 5.
Remove the battery
Pull the tab up and remove the battery.
Step 6.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 7.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Step 8.
Remove the motherboard
Remove the main PCB.
⚠ Warning!
The main board connects to the lower PCB with a connector on the inside.
Step 9.
In the display frame remained
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
19719
Views
2
Likes
—
Share
245
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Samsung instructions most liked by readers
New instructions
Check our
New Samsung brand instructions on vrm24.com
